Dräger Polytron 7500 Instructions For Use Manual page 55

Hide thumbs Also See for Polytron 7500:
Table of Contents

Advertisement

Use the »
« and »
M
tivate it.
— The current for the warning signal is transmitted on the analogue interface.
Use the »
« and »
M
activate it.
— The current for the warning signal is switched off.
– Test maintenance
— This function is used to set the analogue interface to the maintenance
signal »
«.
Note:
These functions may trigger alarms in the control unit! If necessary, the
alarms should be disabled in the control unit before using the functions.
Select the menu items » Settings «, » Communication «, » Analogue interface «
and » Test maintenance « in this order, pressing the »
tion.
Use the »
« and »
M
tivate it.
— The current for the maintenance signal is transmitted on the analogue interface.
Use the »
« and »
M
activate it.
— The current for the maintenance signal is switched off.
LON interface
This function group contains the functions for the LON interface. Operation with
LON: see also "Polytron 7500 Operation via LON" on page 62.
– Neuron ID
Every Polytron 7500 has a Neuron chip with its own Neuron ID, with which the Poly-
tron 7500 can be identified in the LON network.
To display the Neuron ID:
Select the menu items » Settings «, » Communication «, » LON Interface « and
» Neuron ID « pressing the »
— The Neuron ID is displayed.
– Service PIN
The Polytron 7500 can be commissioned by sending its Neuron ID to the LON net-
work with the aid of the function "Service PIN".
Select the menu items » Settings «, » Communication «, » LON Interface « and
» Service PIN « pressing the »
Use the »
« and »
M
this selection.
— The Neuron ID of the Polytron 7500 is transmitted.
9023927 - 2nd edition - May 2007
« keys to select » Enable « and press the »
« keys to select » Disable « and press the »
« keys to select » Enable « and press the »
« keys to select » Disable « and press the »
« key after each selection.
OK
« key after each selection.
OK
« to select » Confirm « and press the »
« key to ac-
OK
« key to
OK
« key after each selec-
OK
« key to ac-
OK
« key to
OK
« key to activate
OK
The menu » Settings «
Page 55 of 72 Pages

Advertisement

Table of Contents
loading

Table of Contents