Table of Contents
Advertisement
5 SETTINGS
a) MAIN MENU
PATH: SETTINGS
PRODUCT SETUP
COMMUNICATIONS
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
b) SERIAL PORTS
PATH: SETTINGS
PRODUCT SETUP
SERIAL PORTS
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The C70 is equipped with up to three independent serial communication ports. The faceplate RS232 port is intended for
local use and is fixed at 19200 baud and no parity. The rear COM1 port type is selected when ordering: either an Ethernet
or RS485 port. The rear COM2 port is RS485. The RS485 ports have settings for baud rate and parity. It is important that
GE Multilin
COMMUNICATIONS
SERIAL PORTS
NETWORK
MODBUS PROTOCOL
DNP PROTOCOL
DNP / IEC 104
POINT LISTS
IEC 61850 PROTOCOL
WEB SERVER
HTTP PROTOCOL
TFTP PROTOCOL
IEC 60870-5-104
PROTOCOL
SNTP PROTOCOL
EGD PROTOCOL
ETHERNET SWITCH
COMMUNICATIONS
SERIAL PORTS
RS485 COM1 BAUD
RATE: 19200
RS485 COM1 PARITY:
None
RS485 COM1 RESPONSE
MIN TIME:
0 ms
RS485 COM2 BAUD
RATE: 19200
RS485 COM2 PARITY:
None
RS485 COM2 RESPONSE
MIN TIME:
0 ms
C70 Capacitor Bank Protection and Control System
5.2 PRODUCT SETUP
5.2.4 COMMUNICATIONS
See below.
See page 5–16.
See page 5–16.
See page 5–17.
See page 5–20.
See page 5–21.
See page 5–32.
See page 5–32.
See page 5–32.
See page 5–33.
See page 5–33.
See page 5–35.
Range: 300, 1200, 2400, 4800, 9600, 14400, 19200,
28800, 33600, 38400, 57600, 115200. Only
active if CPU Type E is ordered.
Range: None, Odd, Even
Only active if CPU Type E is ordered
Range: 0 to 1000 ms in steps of 10
Only active if CPU Type E is ordered
Range: 300, 1200, 2400, 4800, 9600, 14400, 19200,
28800, 33600, 38400, 57600, 115200
Range: None, Odd, Even
Range: 0 to 1000 ms in steps of 10
5
5-15
Advertisement
Table of Contents
