Table of Contents
Advertisement
1 GETTING STARTED
1 GETTING STARTED 1.1IMPORTANT PROCEDURES
Please read this chapter to help guide you through the initial setup of your new relay.
Before attempting to install or use the relay, it is imperative that all WARNINGS and CAUTIONS
in this manual are reviewed to help prevent personal injury, equipment damage, and/or down-
time.
WARNING
CAUTION
1.
Open the relay packaging and inspect the unit for physical damage.
2.
View the rear nameplate and verify that the correct model has been ordered.
C70
Capactior Bank Protection Relay
Technical Support:
Tel: (905) 294-6222
Fax: (905) 201-2098
3.
Ensure that the following items are included:
• Instruction manual.
• GE EnerVista CD (includes the EnerVista UR Setup software and manuals in PDF format).
• Mounting screws.
For product information, instruction manual updates, and the latest software updates, please visit the GE Multilin website at
http://www.GEmultilin.com.
If there is any noticeable physical damage, or any of the contents listed are missing, please contact GE
Multilin immediately.
NOTE
GE MULTILIN CONTACT INFORMATION AND CALL CENTER FOR PRODUCT SUPPORT:
GE Multilin
215 Anderson Avenue
Markham, Ontario
Canada L6E 1B3
TELEPHONE:
(905) 294-6222,
FAX:
(905) 201-2098
E-MAIL:
gemultilin@ge.com
HOME PAGE:
http://www.GEmultilin.com
GE Multilin
RATINGS:
Control Power:
Contact Inputs:
Contact Outputs:
http://www.GEmultilin.com
Figure 1–1: REAR NAMEPLATE (EXAMPLE)
1-800-547-8629 (North America only)
C70 Capacitor Bank Protection and Control System
1.1 IMPORTANT PROCEDURES
1.1.1 CAUTIONS AND WARNINGS
88-300V DC @ 35W / 77-265V AC @ 35VA
300V DC Max 10mA
Standard Pilot Duty / 250V AC 7.5A
360V A Resistive / 125V DC Break
4A @ L/R = 40mS / 300W
Made in
®
Canada
®
1.1.2 INSPECTION CHECKLIST
C70E00HCHF8AH6AM6BP8BX7A
Model:
000
Mods:
834727A1
Wiring Diagram:
Inst. Manual:
GEK-113329
Serial Number:
MAZB98000029
Firmware:
D
Mfg. Date:
2006/07/31
-
M
A
A
B
9
7
0
0
0
0
9
9
-
834726A1.CDR
1
1-1
Advertisement
Table of Contents
