GE UR Series C70 Instruction Manual page 20

1.3 ENERVISTA UR SETUP SOFTWARE
Next, use an Ethernet cross-over cable to connect the laptop to the rear Ethernet port. The pinout for an Ethernet cross-
over cable is shown below.
1
3 4 5 6
2
1
Now, assign the laptop computer an IP address compatible with the relay's IP address.
1. From the Windows desktop, right-click the My Network Places icon and select Properties to open the network con-
nections window.
2. Right-click the Local Area Connection icon and select Properties.
1-10
END 1
7
Pin Wire color
8
1 White/orange
2 Orange
3 White/green
4 Blue
5 White/blue
6 Green
7 White/brown
8 Brown
Figure 1–6: ETHERNET CROSS-OVER CABLE PIN LAYOUT
C70 Capacitor Bank Protection and Control System
END 2
Diagram Pin Wire color
1 White/green
2 Green
3 White/orange
4 Blue
5 White/blue
6 Orange
7 White/brown
8 Brown
1 GETTING STARTED
Diagram
842799A1.CDR
GE Multilin