Table of Contents
Advertisement
Wireless controller
Your wireless controller is designed to be wall mounted on a bracket,
supplied with the controller, within 10 m of the fire.
How it operates
The controller houses the thermostat
that senses the room temperature and
communicates information back to the Neo
via radio frequency.
It needs to be positioned in the same room as
the Neo and the area that requires heating—a
place not subject to temperature fluctuation.
For example; if placed near a door subject to
cold drafts, the controller will sense the room
is much colder than it is and the Neo will keep
heating the room, when in reality the set
temperature has been reached.
Controller position
The ideal position for the controller is:
- away from possible drafts in the room
- away from direct sunlight
- a suitable distance away from the heater,
approximately 2-10 m
- ideally 1.5 m from the floor (approximately
at chest height when standing)
Controller dimensions
Height:
140 mm
Width:
80 mm
Depth:
20 mm
Batteries
Type: 2 x AA batteries
Life:
Approx. 12 months
When the batteries are changed all settings
will be lost and the controller will revert to the
initial setup screen.
10 | Neo operation guide: 11907-E 05-14
Handy tips
The most efficient way of operating your Neo
is with the wireless controller. Once the unit
has been turned on at the wall for the first
time, and the ON button pressed on the unit's
control panel, use the wireless controller to
turn the unit on and off (not the button on the
appliance).
If you turn the appliance on with the button
on the control panel, make sure the wireless
controller is also turned on (otherwise the
appliance will turn itself off).
If you do turn the appliance off with the
button on the appliance you will need to turn
it on again with the button on the appliance—
you won't be able to turn it on with the
remote.
If the appliance is not going and the LED on
the control panel is permanently on, push the
ON/OFF button next to the LED twice to get
the appliance to re-ignite.
If the LED on the appliance is off check the
flame symbol on the wireless controller; if it is
pulsing, the appliance is still on and will relight
when the room temperature drops.
Advertisement
Table of Contents
