Reset Lacp Statistics; Shutdown - HP 830 Command Reference Manual

Usage guidelines
Use this command to clear history statistics before you collect traffic statistics for a time period.
If you do not specify the bridge-aggregation keyword and the interface-number argument, the command
clears statistics for all interfaces in the system.
If you specify only the bridge-aggregation keyword, the command clears statistics for all Layer 2
aggregate interfaces.
If you specify the bridge-aggregation interface-number option, the command clears statistics for the
specified Layer 2 aggregate interface.
The bridge-aggregation keyword is available only when Layer 2 aggregate interfaces exist on the
device.
Examples
# Clear statistics for Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> reset counters interface bridge-aggregation 1

reset lacp statistics

Use reset lacp statistics to clear LACP statistics for the specified link aggregation member ports.
Syntax
reset lacp statistics [ interface interface-list ]
Views
User view
Default command level
1: Monitor level
Parameters
interface-list: Specifies a list of ports in the format interface-type interface-number1 [ to interface-type
interface-number2 ]. interface-type interface-number specifies an interface by its type and number. If no
member ports are specified, the command clears LACP statistics for all member ports.
Examples
# Clear LACP statistics for all link aggregation member ports.
<Sysname> reset lacp statistics

shutdown

Use shutdown to shut down a Layer 2 aggregate interface.
Use undo shutdown to bring up a Layer 2 aggregate interface.
Syntax
shutdown
undo shutdown
Default
Aggregate interfaces are up.
82