HP 830 Command Reference Manual page 119

Parameters
interface interface-type interface-number: Specifies a port by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no port is specified, this command displays the types of advertisable optional TLVs of each port.
Examples
# Display the types of advertisable optional LLDP TLVs of interface Ten-GigabitEthernet 1/0/1.
<Sysname> display lldp tlv-config interface ten-gigabitethernet1/0/1
LLDP tlv-config of port 2[Ten-GigabitEthernet1/0/1]:
NAME
Basic optional TLV:
Port Description TLV
System Name TLV
System Description TLV
System Capabilities TLV
Management Address TLV
IEEE 802.1 extend TLV:
Port VLAN ID TLV
Port And Protocol VLAN ID TLV
VLAN Name TLV
IEEE 802.3 extend TLV:
MAC-Physic TLV
Power via MDI TLV
Link Aggregation TLV
Maximum Frame Size TLV
LLDP-MED extend TLV:
Capabilities TLV
Network Policy TLV
---- More ----
Table 26 Command output
Field
LLDP tlv-config of port 1
NAME
STATUS
STATUS DEFAULT
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
Description
Advertisable optional TLVs of port 1.
TLV type.
Indicates whether a type of TLV is sent through a port.
114