HP 830 Command Reference Manual page 113

Table 23 Command output
Field
LLDP neighbor-information of port 1
Update time
Chassis type
Chassis ID
Port ID type
Port ID
System name
System description
System capabilities supported
System capabilities enabled
Management address OID
Port and protocol VLAN ID(PPVID)
Port and protocol VLAN supported
Port and protocol VLAN enabled
VLAN name of VLAN 1
Auto-negotiation supported
Description
LLDP information received through port 1.
Time when LLDP information about a neighboring device was last
updated.
Chassis ID representation:
•
Chassis component.
•
Interface alias.
•
Port component.
•
MAC address.
•
Network address (ipv4).
•
Interface name.
•
Locally assigned—Indicates a locally-defined chassis type other
than those listed above.
ID that identifies the LLDP sending device, which can be a MAC
address, a network address, an interface, or some other value,
depending on the chassis type.
Port ID representation:
•
Interface alias.
•
Port component.
•
MAC address.
•
Network address (ipv4).
•
Interface name.
•
Agent circuit ID.
•
Locally assigned—Indicates a locally-defined port ID type other
than those listed above.
Value of the port ID type.
System name of the neighboring device.
System description of the neighboring device.
Capabilities supported on the neighboring device:
•
Repeater—Signal repeating is supported.
•
Bridge—Switching is supported.
•
Router—Routing is supported.
Capabilities enabled on the neighboring device:
•
Repeater—Signal repeating is enabled.
•
Bridge—Switching is enabled.
•
Router—Routing is enabled.
Management address object ID.
Port protocol VLAN ID.
Indicates whether protocol VLAN is supported on the port.
Indicates whether protocol VLAN is enabled on the port.
Name of VLAN 1.
Indicates whether auto-negotiation is supported on the port.
108