HP 830 Command Reference Manual page 114

Field
Auto-negotiation enabled
OperMau
Power port class
PSE power supported
PSE power enabled
PSE pairs control ability
Power pairs
Port power classification
Link aggregation supported
Link aggregation enabled
Aggregation port ID
Location format
PoE PSE power source
PoE PD power source
Port PSE Priority
Description
Indicates whether auto-negotiation is enabled on the port.
Speed and duplex state on the port.
PoE device type:
•
PSE—Power sourcing equipment.
•
PD—Powered device.
Indicates whether the device can operate as a PSE.
Indicates whether the device is operating as a PSE.
Indicates whether the pair selection ability is available.
Power supply mode:
•
Signal—Uses data pairs to supply power.
•
Spare—Uses spare pairs to supply power.
Port power classification of the PD:
•
Class 0.
•
Class 1.
•
Class 2.
•
Class 3.
•
Class 4.
Indicates whether link aggregation is supported.
Indicates whether link aggregation is enabled.
Aggregation group ID, which is 0 when link aggregation is disabled.
Location information format:
•
Invalid—The format of the location information is invalid.
•
Coordinate-based LCI—The location information is
coordinate-based.
•
Civic Address LCI—Typical address information.
•
ECS ELIN—Telephone for urgencies.
PSE power type:
•
Unknown—Unknown power supply.
•
Primary—Primary power supply.
•
Backup—Backup power supply.
PD power type:
•
Unknown—Unknown power supply.
•
PSE—PSE power supply.
•
Local—Local power supply.
•
PSE and local—PSE and local power supplies.
PoE power supply priority of PSE ports:
•
Unknown.
•
Critical.
•
High.
•
Low.
109