Pppoe-Server Max-Sessions Remote-Mac; Pppoe-Server Max-Sessions Total - HP 830 Command Reference Manual

Default command level
2: System level
Parameters
number: Specifies the maximum number of sessions allowed with regard to the local MAC address, in the
range of 1 to 20480.
Examples
# Set the maximum number of PPPoE sessions allowed with regard to the local MAC address to 50.
(Assume the device is operating as a PPPoE server.)
<Sysname> system-view
[Sysname] pppoe-server max-sessions local-mac 50

pppoe-server max-sessions remote-mac

Use pppoe-server max-sessions remote-mac to set the maximum number of PPPoE sessions allowed with
regard to a peer MAC address.
Use undo pppoe-server max-sessions remote-mac to restore the default.
Syntax
pppoe-server max-sessions remote-mac number
undo pppoe-server max-sessions remote-mac
Default
The maximum number of PPPoE sessions allowed with regard to a peer MAC address is 100.
Views
System view
Default command level
2: System level
Parameters
number: Specifies the maximum number of PPPoE sessions that the entire system can establish with a peer
MAC address, in the range of 1 to 4096.
Examples
# Set the maximum number of PPPoE sessions allowed with regard to a peer MAC address to 50.
<Sysname> system-view
[Sysname] pppoe-server max-sessions remote-mac 50

pppoe-server max-sessions total

Use pppoe-server max-sessions total to set the maximum number of PPPoE sessions allowed.
Use undo pppoe-server max-sessions total to restore the default.
Syntax
pppoe-server max-sessions total number
undo pppoe-server max-sessions total
95