Pppoe-Server Normal-Offline-Percent Threshold - HP 830 Command Reference Manual

Default
The maximum number of PPPoE sessions allowed is 4096.
Views
System view
Default command level
2: System level
Parameters
number: Specifies the maximum number of PPPoE sessions allowed, in the range of 1 to 20480.
Examples
# Set the maximum number of PPPoE sessions allowed to 3000 in the system.
<Sysname> system-view
[Sysname] pppoe-server max-sessions total 3000

pppoe-server normal-offline-percent threshold

Use pppoe-server normal-offline-percent threshold to set the lower threshold for the PPPoE normal offline
event percentage.
Use undo pppoe-server normal-offline-percent threshold to restore the default.
Syntax
pppoe-server normal-offline-percent threshold number
undo pppoe-server normal-offline-percent threshold
Default
The lower threshold for the PPPoE normal offline event percentage is 0.
Views
System view
Default command level
2: System level
Parameters
number: Specifies the lower threshold for the PPPoE normal offline event percentage, in the range of 0 to
100.
Usage guidelines
If the PPPoE normal offline event percentage in the last 5 minutes is lower than this threshold, the system
outputs a trap message.
PPPoE normal offline event percentage = 100 – PPPoE abnormal offline event percentage.
Examples
# Set the lower threshold for the PPPoE normal offline event percentage to 10.
<Sysname> system-view
[Sysname] pppoe-server normal-offline-percent threshold 10
96