Omron CJ1G/H-CPU series Operation Manual page 303

PLC Setup
String Data Process Instructions (CJ1-H and CJ1M CPU Units Only)
Address in
Programming
Console
Word Bit(s)
198 14 0: Not executed in
background.
1: Executed in back-
ground.
Default: 0
Data Shift Process Instructions (CJ1-H and CJ1M CPU Units Only)
Address in
Programming
Console
Word Bit(s)
198 13 0: Not executed in
background.
1: Executed in back-
ground.
Default: 0
Communications Port Number for Background Execution (CJ1-H and CJ1M CPU Units Only)
Address in
Programming
Console
Word Bit(s)
198 0 to 3 0 to 7: Communica-
tions ports 0 to 7
(internal logical
ports)
7-1-2-3 CPU Settings Tab Page: FB Communications Instruction Settings
(Settings for OMRON FB Library)
Number of Resends
Address in
Programming
Console
Word Bit(s)
200 0 to 3 0 to F: 0 to 15
Default: 0
270
Settings
This setting determines if Text String Data
Instructions will be processed over multiple
cycle times (i.e., processed in the back-
ground).
Settings
This setting determines if Data Shift Instruc-
tions will be processed over multiple cycle
times (i.e., processed in the background).
Settings
The communications port number (internal
logical port) that will be used for background
execution.
The following PLC Setup settings are used only when using the OMRON FB
Library.
Settings
Set the number of retries for sending com-
mands when executing DeviceNet explicit
messages or FINS messages within func-
tion blocks.
Function
Function
Function
Function
Section 7-1
Related When set-
flags and ting is read
words by CPU Unit
--- At start of
operation
Related When set-
flags and ting is read
words by CPU Unit
--- At start of
operation
Related When set-
flags and ting is read
words by CPU Unit
--- At start of
operation.
Related New set-
flags and ting's effec-
words tiveness
A58000 to Start of oper-
A58003 ation