Specifications - Honeywell GSMV4G Installation And Setup Manual

Specifications

Mechanical:
Input Power:
Current Drain:
Backup Battery:
Fault Relay Output:
Positive Trigger
Level:
Negative Trigger
Level:
RF Frequency:
RF Output Power:
Environmental:
Dimensions: 8.4" x 8.0" x 1.5" Weight: 2.4 lbs., with battery
16.5VAC, 40VA transformer, or for ULC installations 12VDC from
the control panel.
(Honeywell transformer # 1361 included with GSMV4G.)
(Honeywell transformer # 1361CN not included with the
GSMVCN4G.)
220mA standby, 380mA active
6V, 3.1AH, (Honeywell # K14139 included with GSMV4G only.)
Expected Battery Life: 5 Years (approx.)
Note: The sealed lead acid battery used for backup will have
reduced life expectancy when exposed to elevated temperatures.
The useful life of the battery at 25ºC (77ºF) is approximately 4 years.
At 35ºC (95ºF) this will drop to 2 years and at 45ºC (113ºF) 1 year.
Battery life expectancy should be taken into account when locating
the radio.
Open collector, 12VDC, 0.25W max.
6V or greater = positive trigger. (4V or less = restore.)
4V or less = negative trigger. (6V or greater = restore.)
2G GSM/GPRS/EDGE
3G/4G UMTS/HSPA+
2G GPRS
EDGE
3G UMTS
WCDMA
4G HSPA+
WCDMA
Operating temperature: –20º to +55ºC, for UL/ULC installations 0ºC
to +49ºC
Storage temperature: –40º to +70ºC
Humidity: 0 to 95% relative humidity, non-condensing
for UL installations 0% to 85%; for ULC installations 0% to 93%
Altitude: to 10,000 ft. operating, to 40,000 ft. storage
Section 1: General Information
Quad Band, 850/900/1800/1900 MHz
Band V, Band II
+33dBm, GMSK modulation
+27dBm, 8-PSK modulation
+24dBm, QPSK modulation
+24dBm, QPSK modulation
+24dBm, 64 QAM modulation
+24dBm, 64 QAM modulation
1-5