Section 1: General Information; System Overview; Introduction; General Information - Honeywell GSMV4G Installation And Setup Manual

Intellipath series 4g gsm communicator
Table of Contents

Advertisement

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

System Overview

Introduction

Congratulations on your purchase of Honeywell's GSMV4G GSM Communicator (referred to
as the GSMV4G, or GSMVCN4G in Canada). It represents the latest and most innovative
communication technology for the security industry and uses sophisticated encryption to
ensure the highest level of security for your customer.
The new 4G connectivity brings faster GSM data transfers with lower latency (response
time); together it results in speedier data transfers.
The communicator requires an AlarmNet–i account. For new installations, please obtain the account
information from the central station prior to programming this communicator. For replacement
installations, the AlarmNet-i account is created automatically when the communicator is registered
(based on the existing account).
In addition to alarm reporting, the communicator provides two-way voice communications
with the central station (when used with Honeywell's AVS Audio Verification System) and
provides upload/downloading capability of Honeywell's control panel data over the Internet
(via the AlarmNet-G network), using GSM (Global System for Mobile) technology.
UL / ULC
NOTE: Two-way voice is not compatible with Honeywell Commercial Control Panels (such
as the VISTA-128/250 series).
Due to Honeywell's continuing effort to improve our products, your device may look slightly
different than pictured.

General Information

The communicator transmits signals to the AlarmNet-G network (GSM cellular network,
using GPRS) and forwards them to your central station.
If the GPRS network is unavailable, the communicator (if enabled by the dealer) will attempt
to send the transmission via SMS (Short Message Service) and/or email.
ULC
The communicator also provides support for AlarmNet Remote Services. These services
allow users remote access to their security systems and provide the ability for users to be
notified of system events via email.
ULC

System Features

Basic features of the communicator include:
• Remote Services allow the end user to access their security system from their computer
via a website. Availability of this service is controlled by the dealer via the web-based
programming tool on the AlarmNet Direct website. Once enabled, remote access can be
programmed via web or 7720P programming tool.
• Quick connection to compatible Honeywell series control panels
Two-way voice has not been evaluated by UL/ULC.
SMS has not been evaluated for ULC central station communication.
The GSMVCN4G is only employed for supplemental use. A listed DACT is required to be
used in conjunction with the GSMVCN4G to provide passive communication for fire and
Level P2 channel security for burglary.
General Information
S E C T I O N
1
1-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gsmvcn4g

Table of Contents