Gsm Status Displays - Honeywell GSMV4G Installation And Setup Manual

Intellipath series 4g gsm communicator
Table of Contents

Advertisement

GSMV4G/GSMVCN4G Installation and Setup Guide

GSM Status Displays

[E]
5-2
Operating with 3G/4G service
PriRSSI
3/4G REG
-xxxdbm
stat
x
RAT
Ec/N0
3G/4G
-xxxxx
Cntry
Netw
LAC
xxx
xxx
xxxxx
Cell
Chan
PSC
xxxxxxx xxxx
xxx
Second Site
RSSI
Available
Status Display Screen 1
PriRSSI – Primary site RSSI level in dBm.
3/4G – Communicator is on the 3G/4G network where
"stat" can be:
Good
RSSI –20 to –90 dBm
OK
RSSI –91 to –99 dBm
Marginal RSSI –100 to –105 dBm
Bad
RSSI –106 to –150 dBm
REG – Registration status where "x" can be:
N – Not Registered
H – Registered Home
S – Searching
D – Registration Denied
R – Registered Roaming
? – Unknown Registration State
Press the [space] key to go to the next screen.
Press the [backspace] key to go to the last screen.
Status Display Screen 2
RAT – Radio Access Technology.
Ec/N0 – Carrier Noise Ratio (CNR)
Press the [space] key to get to the next screen.
Press the [backspace] key to go to the previous field.
Status Display Screen 3
Cntry – Country Code
Netw – Network Code
LAC – Local area code
Press the [space] key to get to the next screen.
Press the [backspace] key to go to the previous field.
Status Display Screen 4
Cell – Base Station ID
Chan – Control Channel in use
PSC – Primary Sync Code
Press the [space] key to go to the next screen.
Press the [backspace] key to go to the previous field.
Status Display Screen 5
Secondary Site RSSI availability. Available or Not
Available will be displayed.
Press the [space] key to go to Status Display Screen 1.
Press the [backspace] key to go to the previous field.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gsmvcn4g

Table of Contents