Description Of Menu 8 Functions - Ikegami HLM-905WR Operation Manual

4-11 Description of MENU 8 Functions

Setting the functions of parallel remote pins
Select the pre-assigned pin functions of parallel
remote control or the individual user-set func-
tions.
* By default, the pre-assigned pin functions are
displayed beneath.
Setting the IP conversion mode
When USER is selected in
dividual pin functions. The settable functions are
as follows.
CH-B selection of CH-B
SDI selection of SDI input
MONO selection of MONO
16:9 selection of SDTV aspect ratio
16:9
MARKER marker ON
SHADOW shadow ON at MENU7-preset
level
SHADOW0 shadow ON at shadow level 0%
(Black)
SHADOW20 shadow ON at shadow level
20%
SHADOW40 shadow ON at shadow level
40%
SHADOW60 shadow ON at shadow level
60%
R-TALLY R tally ON
G-TALLY G tally ON
(blank) unassigned
Setting the functions of parallel remote pins
Setting the user pin functions
*
tions
, set the in-
* The functions of the following pins, which are
fixed, cannot be changed.
- - 37
SHADOW0 , SHADOW20
SHADOW40 and
Select two or more SHADOW settings at once,
and SHADOW0 (Black) is given priority.
When any of these functions is turned ON, the
MENU8-adjusted shadow level is forced to go
back to the level remotely preset.
Pin 1 : Make contact GND
,
SHADOW60 func-