Table of Contents
Advertisement
4-7 Description of MENU 5 Functions
Setting the chroma gain-up ON/OFF
Set the gain-up ON/OFF for chroma signals.
At the time of ON, the chroma gain increases by
+6 dB.
This function can be assigned with the F1
switch on the front panel.
Default setting is OFF.
Setting the IP conversion mode
The mode for I
P conversion is set in the
1035i/1080i/1080psF/480i/575i formats.
FRAME
The information on the previous
and subsequent fields is used to
convert images to progressive ones.
Thanks to this, diagonal interpola-
tion of moving images is enabled for
optimum setting.
FIELD
The line interpolation in the field is
used to convert images to progres-
sive ones. In this way, the signal
delay can be minimized.
Default setting is FRAME.
* If the delay difference between video and audio
are noticeable, change to
setting will help operate regularly. Compared to
FRAME interpolation, the FIELD setting may
produce jaggies in moving images viewed di-
agonally.
Setting the chroma gain-up ON/OFF
Setting the IP conversion mode
Adjusting the horizontal screen position
Adjusting the vertical screen position
Setting the contrast range
F2
FIELD
setting. This
Adjusting the horizontal screen position
Adjust the horizontal screen position of VIDEO
input (SDI, VBS).
The settings are memorized for each channel,
each format.
Default setting is 0.
Adjusting the vertical screen position
Adjust the vertical screen position of VIDEO
input (SDI, VBS).
The settings are memorized for each channel,
each format.
Default setting is 0.
Setting the contrast range
NORMAL
Set the video level within the range
with no over-flow even if the con-
trast level is MAX.
WIDE
The contrast level can be increased
to two times.
*The high level video has the
over-flow.
Default setting is NORMAL.
- -
27
Advertisement
Table of Contents
