Description Of Menu 3 Functions - Ikegami HLM-905WR Operation Manual

4-5 Description of MENU 3 Functions

Setting the SDI VITC display ON/OFF
Used to turn ON or OFF the VITC display
multiplexed with HD-SDI signal.
This function can be assigned with the F1
F2 switch on the front panel.
Default setting is OFF.
Setting of SDI VITC display brightness
Used to set the SDI VITC display brightness in
three levels, LOW, MID and HIGH.
Default setting is MID.
Setting of SDI VITC display size
Used to select the SDI VITC display size,
NORMAL or LARGE.
Default setting is NORMAL.
Setting of waveform display ON/OFF
Used to turn ON or OFF the waveform display
of luminance signal.
This function can be assigned with the F1 F2
switch on the front panel.
Default setting is OFF.
Setting of waveform display brightness
Used to set the waveform display brightness in
three levels, LOW, MID, HIGH and HIGH(M).
HIGH(M) mode transmits with a picture and
displays it.
Default setting is HIGH(M).
Setting the SDI VITC display ON/OFF
Setting the SDI VITC display brightness
Setting the SDI VITC display Size
Setting the waveform display ON/OFF
Setting the waveform display brightness
Setting the waveform display size
Setting the waveform display position
Setting the waveform display color
Setting the VECTOR SCOPE display ON /OFF
Setting the VECTOR SCOPE display brightness
Setting the VECTOR SCOPE display magnification ratio
Setting the COLOR BOX scale display
Setting the VECTOR SCOPE display position
Setting the VECTOR SCOPE display color
Setting of waveform display size
Used to set the luminance signal waveform display
size, NORMAL or SMALL.
The SMALL setting displays the waveform half as
tall as in the NORMAL setting.
Default setting is NORMAL.
Setting of waveform display position
Used to set the waveform display position, RIGHT,
CENTER or LEFT.
Default setting is RIGHT.
Setting of waveform display color
Used to set the waveform display color, GREEN or
WHITE.
Default setting is WHITE.
- - 20