Introduction; Features - Rice Lake MSI-8000 Technical Manual

Hide thumbs Also See for MSI-8000:

Table of Contents

1.0

Introduction

The MSI-8000 RF Remote Display makes wireless control easy with the ability to operate weighing systems from a

distance. The wireless remote display can be used for viewing MSI ScaleCore-based crane scales and

dynamometers, including any RF compatible MSI-3460 Challenger 3, MSI-4260 Port-A-Weigh or MSI-7300

Dyna-Link 2.

It is fully sealed for outdoor use in most ambient conditions and enhances the safety and usability of Rice Lake's

Dyna-Link and crane scale systems. The MSI-8000 uses a rechargeable Lithium Polymer battery, providing up to

24 hours (typical) of continuous use between charges.

This manual is intended for use by qualified technicians responsible for setting up and operating the MSI-8000

Manuals can viewed or downloaded from the Rice Lake Weighing Systems website at 

www.ricelake.com

Warranty information can be found on the website at

1.1

• Meets or exceeds all U.S./International safety and environmental standards

• No license required. Meets U.S./International RF Transmission Laws

• Rechargeable Lithium Polymer battery provides up to 24 hours operation when fully charged

• Automatic Power Off turns the unit off, after a user set time of no activity, to save battery life

• The enclosure is IP68/NEMA Type 4 for outdoor use, with shock cushioning on the corners

• Six, 1'' (26 mm) LCD digits for clear load readings

• Selectable for kg/lb/Tons (US Short)/Metric Tons/kiloNewtons

• Automatic or manual weight totalization for loading operations

• Eight setpoints can be set for in-range load/weight value for operator alerts or process control

• ScaleCore technology provides quick and easy firmware updates and calibration/setup backup

• Optional hard-wired link for applications where RF is not allowed

www.ricelake.com/warranties

Introduction

Table of Contents