Table of Contents
Advertisement
Parameters
Choices
4.2
Function Keys
There are two programmable function keys on the MSI-8000HD
• Function key setup is independent of the connected scale/Dyna-Link function keys.
F3
•
and
PRINT
TARE
• If a function key does not work, the connected Scale/Dyna-Link may not be set up to support the key.
Example: If the Function key is set for TOTAL, then TOTAL mode setup in the Setup Menu must also be
set up for the target scale.
To set a function key use the following steps:
1. Press
and
POWER
2. Press
F2
to scroll to the function key to be programmed.
3. Press
F1
. The currently saved parameter will display.
4. Press
F2
to scroll through the choices.
5. Press
to select the desired choice.
F1
6. Press
to save and exit.
ZERO
4.2.1 Test
The test feature only tests the MSI-8000HD. Set an
To run a test, press
Fx-TEST
• Light all LCD segments and the LEDs
•
followed by the version number
•
followed by the battery level in volts
•
followed by counting from 00000 to 99999
The test can be single stepped by:
1. Press
, immediately press
Fx-TEST
2. Use
F2
to scroll through the steps and
3. Press
to abort the test at any time.
ZERO
Relay Output – dependant on the application being used
Latch – if power is lost, the relay retains it's settings
Coil – needs power to remain position
Battery Life – sets the options for standard or extended battery life.
See Section 4.6 on page 13
Standards – sets the industry standard to be used.
Table 4-1. Setup Menu Parameter Descriptions
are standard on the MSI-8000HD and do not need to be programmed.
at the same time, will display.
F2
, the following items scroll across the display.
F2
to stop the auto scroll.
Description
,
F1
and
F2
.
to
.
F-key
TEST
F1
to view the step value.
Setup
9
Advertisement
Table of Contents
