Introduction; Safety - Rice Lake LaserLT-60 Technical Manual

Remote displays
Hide thumbs Also See for LaserLT-60:
Table of Contents

Advertisement

1.0

Introduction

The purpose of this manual is to help the technician understand the LaserLT-60 and LaserLT-100 Remote Display's functioning
modes, key functions, display indications, setup and configuration.
Manuals and additional resources are available from the Rice Lake Weighing Systems website at
Warranty information can be found on the website at
1.1

Safety

Safety Signal Definitions:
Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. Includes
DANGER
hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided, could result in serious injury or death. Includes
WARNING
hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided, could result in minor or moderate injury.
CAUTION
Indicates information about procedures that, if not observed, could result in damage to equipment or corruption
IMPORTANT
to and loss of data.
Do not operate or work on this equipment unless this manual has been read and all instructions are understood.
Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Rice Lake
Weighing Systems dealer for replacement manuals.
Electric shock hazard!
There are no user serviceable parts. Refer to qualified service personnel for service.
The unit has no power switch, to completely remove power from the unit, disconnect the power source.
For pluggable equipment the socket outlet must be installed near the equipment and must be easily accessible.
Always disconnect from main power before performing any work on the device.
Do not allow minors (children) or inexperienced persons to operate this unit.
Do not operate without all shields and guards in place.
Do not use for purposes other then weighing applications.
Do not place fingers into slots or possible pinch points.
Do not use this product if any of the components are cracked.
Do not make alterations or modifications to the unit.
Do not remove or obscure warning labels.
Do not use near water, avoid contact with excessive moisture.
www.ricelake.com/warranties
General Safety
WARNING
Failure to heed could result in serious injury or death.
© Rice Lake Weighing Systems ● All Rights Reserved
Introduction
www.ricelake.com
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Laserlt-100

Table of Contents