About This Manual; Introduction - Rice Lake SURVIVOR IQ F Series Installation Manual

About This Manual

This manual is intended for use by service technicians
responsible for installing and servicing the F-Series
flip digit remote displays. Installation procedures are
presented in the order likely to be followed by the
installer: pre-installation setup, configuration, on-site
installation.
This manual applies to units using Version 1.1 of the
F-Series remote display software.
1.0

Introduction

The F-Series flip digit remote displays provide
high-visibility, six-digit display capability for use in a
wide variety of applications. This manual provides
installation and configuration instructions for the F15
(1.5-inch), F40 (4-inch) and F60 (6-inch) flip digit
remote displays.
The F-Series remote displays are designed to work
with most digital weight indicators using 20 mA
current loop or RS-232 communications. The
™
AutoLink learn mode function allows the F-Series
displays to automatically determine the data rate and
format sent by the attached indicator.
Optional features include time and temperature
display, fluorescent backlighting for increased display
visibility, and visor options for the F40 and F60
models.
Most procedures described in this
Warning
manual require work inside the remote
display enclosure. These procedures are
to be performed by qualified service
personnel only.
Authorized distributors and their employees
can view or download this manual from the
Rice Lake Weighing Systems distributor
site at www.rlws.com
Optional Features
Table 1-1 lists the optional features available for the
F-Series remote displays. Units can be ordered from
the factory with these options already installed, or the
options can be separately ordered and installed into
existing F-Series displays.
Option
Time
Temperature
Visor
Backlighting F15 (115 VAC)
F40 (115/230 VAC)
F60 (115/230 VAC)
Table 1-1. Options for F-Series Remote Displays
.
Model PN
All 43522
All 43412
F40 41248
F60 41247
43599
40881
43520
Introduction 1