System Parameter Setting; System Shoutcut Key Operation - Adtech 4 Series Maintenance Manual

2:for incremental input and directly input ,there is a symbol at the left side ,‖=‖ is directly input,‖+‖ is incremental
input ,the default setting is directly input(=),in setting dialog,press ↑↓shift directly and incremental input .

4.7.2 System parameter setting

The system parameters can be modified as follow:
➢
Select the edit mode;
➢
In the main menu, press [Para] to enter parameter setting interface;
➢ Then, press the submenu key to select the parameter type (General, manage ...);
➢
Move cursor to select the parameter, enter the value and then press [EOB] to modify the parameter where the cursor
locates.

4.8 System shoutcut key operation

➢ Under [monitor]mode, [pos] interface,then ―o‖key,the controller will show a dialog ,you can select
one O program (O0001,O0002,and son on ),"EOB" for comfirming.
➢ Under [monitor]mode, [pos] interface,Jog mode,press"←" ， "→",for adjusting the spindle speed.
Note :this function is effected only when the spindle is working and speed is not 0,so if the speed is
0 ,you can make a program start the spindle and speed is not 0 ,then you can use this shortcut key
function.
ADTECH 4 series CNC System (maintainance Manual)
19