ZyXEL Communications P-793H v3 User Manual page 211

Table 87 System Maintenance Logs (continued)
LOG MESSAGE
Successful WEB login
WEB login failed
Successful TELNET login
TELNET login failed
Successful FTP login
FTP login failed
NAT Session Table is Full!
Starting Connectivity
Monitor
Time initialized by Daytime
Server
Time initialized by Time
server
Time initialized by NTP
server
Connect to Daytime server
fail
Connect to Time server fail
Connect to NTP server fail
Too large ICMP packet has
been dropped
Configuration Change: PC =
0x%x, Task ID = 0x%x
Successful SSH login
SSH login failed
Successful HTTPS login
HTTPS login failed
Table 88 System Error Logs
LOG MESSAGE
%s exceeds the max.
number of session per
host!
setNetBIOSFilter: calloc
error
readNetBIOSFilter: calloc
error
WAN connection is down.
Chapter 22 Logs
DESCRIPTION
Someone has logged on to the router's web configurator
interface.
Someone has failed to log on to the router's web
configurator interface.
Someone has logged on to the router via telnet.
Someone has failed to log on to the router via telnet.
Someone has logged on to the router via ftp.
Someone has failed to log on to the router via ftp.
The maximum number of NAT session table entries has been
exceeded and the table is full.
Starting Connectivity Monitor.
The router got the time and date from the Daytime server.
The router got the time and date from the time server.
The router got the time and date from the NTP server.
The router was not able to connect to the Daytime server.
The router was not able to connect to the Time server.
The router was not able to connect to the NTP server.
The router dropped an ICMP packet that was too large.
The router is saving configuration changes.
Someone has logged on to the router's SSH server.
Someone has failed to log on to the router's SSH server.
Someone has logged on to the router's web configurator
interface using HTTPS protocol.
Someone has failed to log on to the router's web
configurator interface using HTTPS protocol.
DESCRIPTION
This attempt to create a NAT session exceeds the maximum
number of NAT session table entries allowed to be created per
host.
The router failed to allocate memory for the NetBIOS filter
settings.
The router failed to allocate memory for the NetBIOS filter
settings.
A WAN connection is down. You cannot access the network
through this interface.
P-79X Series User's Guide
211