Appendix B Wall-Mounting Instructions - ZyXEL Communications P-793H v3 User Manual

Do the following to hang your P-79X on a wall.
Note: See the product specifications appendix for the size of screws to use and how far
apart to place them.
Locate a high position on a wall that is free of obstructions. Use a sturdy wall.
1
Drill two holes for the screws. Make sure the distance between the centers of the holes matches
2
what is listed in the product specifications appendix.
Note: Be careful to avoid damaging pipes or cables located inside the wall when drilling
holes for the screws.
Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm between the
3
heads of the screws and the wall.
Make sure the screws are snugly fastened to the wall. They need to hold the weight of the P-79X
4
with the connection cables.
Align the holes on the back of the P-79X with the screws on the wall. Hang the P-79X on the
5
screws.
Figure 139 Wall-mounting Example
A
PP EN D I X
Wall-mounting Instructions
P-79X Series User's Guide
243
B