Click Advanced > Remote MGMT > SSH. The screen appears as shown.
Figure 113 Advanced > Remote MGMT> SSH
The following table describes the labels in this screen.
Table 75 Advanced > Remote MGMT > SSH
LABEL
Port
Access Status
Secured Client IP
Apply
Cancel
19.5 The SNMP Screen
Simple Network Management Protocol (SNMP) is a protocol used for exchanging management
information between network devices. SNMP is a member of the TCP/IP protocol suite. Your P-79X
supports SNMP agent functionality, which allows a manager station to manage and monitor the P-
79X through the network. The P-79X supports SNMP version one (SNMPv1) and version two
(SNMPv2). The next figure illustrates an SNMP management operation.
Note: SNMP is only available if TCP/IP is configured.
Chapter 19 Remote Management
DESCRIPTION
This field displays the port number of the SSH service. You must use the same
port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the P-79X using
this service.
A secured client is a "trusted" computer that is allowed to communicate with the
P-79X using this service.
Select All to allow any computer to access the P-79X using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the P-79X using this service.
Click this to save your changes.
Click this to restore your previously saved settings.
P-79X Series User's Guide
185