The Configuration Screen - ZyXEL Communications P-793H v3 User Manual

The following table describes the labels in this screen.
Table 106 Maintenance > Tools > Firmware
LABEL
Current
Firmware
Version
File Path
Choose File
Upload
After you see the Firmware Upload in Progress screen, wait two minutes before logging into the
P-79X again.
Figure 129 Firmware Upload In Progress
The P-79X automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 130 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.

23.3 The Configuration Screen

See Section 23.1.4 on page 219
Click Maintenance > Tools > Configuration. Information related to factory defaults, backup
configuration, and restoring configuration appears in this screen, as shown next.
Chapter 23 Tools
DESCRIPTION
This is the present Firmware version and the date created.
Type in the location of the file you want to upload in this field or click Choose File
to find it.
Click this to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click this to begin the upload process. This process may take up to two minutes.
for transferring configuration files using FTP/TFTP commands.
P-79X Series User's Guide
225