Configuring Firewall Rules - ZyXEL Communications P-793H v3 User Manual

Table 36 Security > Firewall > Rules (continued)
LABEL
Log
Modify
Order
Apply
Cancel

10.3.1 Configuring Firewall Rules

Refer to Section 10.1.2 on page 100
Use this screen to configure firewall rules. In the Rules screen, select an index number and click
Add or click a rule's Edit icon to display this screen and refer to the following table for information
on the labels.
Chapter 10 Firewalls
DESCRIPTION
This field shows you whether a log is created when packets match this rule (Yes)
or not (No).
Click the Edit icon to go to the screen where you can edit the rule.
Click the Remove icon to delete an existing firewall rule. A window displays asking
you to confirm that you want to delete the firewall rule. Note that subsequent
firewall rules move up by one when you take this action.
Click the Move icon to display the Move the rule to field. Type a number in the
Move the rule to field and click the Move button to move the rule to the number
that you typed. The ordering of your rules is important as they are applied in order
of their numbering.
Click this to save your changes.
Click this to restore your previously saved settings.
for more information.
P-79X Series User's Guide
105