Set Up The Clients - ZyXEL Communications P-793H v3 User Manual

Figure 24 WAN > Internet Access Setup

5.3.2 Set up the Clients

Log in to the client P-79X of branch office B.
1
Click Network > WAN > Internet Access Setup.
2
Select ATM as the Transfer Mode. Set the VPI, VCI, Multiplexing, and Encapsulation to the
3
same values you set in the server.
Scroll down to the Service Type section. In the Service Mode field, select 2 wire. In the Service
4
Type field, select Client. The rest of the fields will be negotiated with the server. Click Apply.
Figure 25 WAN > Internet Connection > Service Type of B
Repeat the above steps 1 to 4 for the second client P-79X on C's side. The Service Type should
5
look like the following.
Chapter 5 Tutorials
P-79X Series User's Guide
42