ZyXEL Communications P-793H v3 User Manual page 215

P-79x series g.shdsl.bis broadband gateway
Hide thumbs Also See for P-793H v3:
Table of Contents

Advertisement

Table 97 Attack Logs (continued)
LOG MESSAGE
ip spoofing - no routing
entry [ TCP | UDP | IGMP
| ESP | GRE | OSPF ]
ip spoofing - no routing
entry ICMP (type:%d,
code:%d)
vulnerability ICMP
(type:%d, code:%d)
traceroute ICMP (type:%d,
code:%d)
Table 98 802.1X Logs
LOG MESSAGE
RADIUS accepts user.
RADIUS rejects user. Pls check
RADIUS Server.
User logout because of session
timeout expired.
User logout because of user
deassociation.
User logout because of no
authentication response from
user.
User logout because of idle
timeout expired.
User logout because of user
request.
No response from RADIUS. Pls
check RADIUS Server.
Use RADIUS to authenticate user.
No Server to authenticate user.
Table 99 ACL Setting Notes
PACKET DIRECTION
DIRECTION
(L to W)
LAN to WAN
(W to L)
WAN to LAN
(L to L/P-79X)
LAN to LAN/P-79X ACL set for packets traveling from the LAN to the LAN or
(W to W/P-79X)
WAN to WAN/P-
79X
Chapter 22 Logs
DESCRIPTION
The firewall classified a packet with no source routing entry as an
IP spoofing attack.
The firewall classified an ICMP packet with no source routing
entry as an IP spoofing attack.
The firewall detected an ICMP vulnerability attack.
The firewall detected an ICMP traceroute attack.
DESCRIPTION
A user was authenticated by the RADIUS Server.
A user was not authenticated by the RADIUS Server.
Please check the RADIUS Server.
The router logged out a user whose session expired.
The router logged out a user who ended the session.
The router logged out a user from which there was no
authentication response.
The router logged out a user whose idle timeout period
expired.
A user logged out.
There is no response message from the RADIUS server,
please check the RADIUS server.
The RADIUS server is operating as the authentication
server.
There is no authentication server to authenticate a user.
DESCRIPTION
ACL set for packets traveling from the LAN to the WAN.
ACL set for packets traveling from the WAN to the LAN.
the P-79X.
ACL set for packets traveling from the WAN to the WAN
or the P-79X.
P-79X Series User's Guide
215

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P-792h v3P-791r v3

Table of Contents