Scroll down to the Service Type section. In the Service Mode field, select 2 wire, the same type
4
of connection you selected for the server. In the Service Type field, select Client. The rest of the
fields will be negotiated with the server. Click Apply.
5.2.3 Connect the P-79Xs
Connect the DSL ports on the P-79Xs together, and wait while the P-79Xs automatically establish
the connection. When the connection is established, the DSL1, DSL2, and INTERNET lights are
on. It takes up to half a minute to establish the connection. If the P-79Xs do not establish the
connection, verify that the settings (except the Service Type) match.
5.3 Configuring a Point-to-2points Connection
Now Company A has another branch office, C and wants to set up a point-to-2points connection
between a server P-79X on A's side and client P-79Xs at B and C. The maximum transfer rate for
the DSL connection between A and B is 5696 Kbps and the minimum transfer rate is 3200 Kbps.
The maximum transfer rate for the DSL connection between A and C is 2560 Kbps and minimum
transfer rate is 1280 Kbps.
Chapter 5 Tutorials
P-79X Series User's Guide
40