Philips IntelliVue TRx Instructions For Use Manual page 99

Draft - 1 Aug 08
The transceiver detects the inserted leadset type and automatically determines
the ECG measurement and transmitted leads. The Leadset Insertion Guide on
the device will assist you in ensuring the correct measurement during transceiver
usage. If the transceiver senses the insertion of a leadset not matching the
current configuration, the transceiver will source the ECG per the leadset
detected and issue and auditory signal to indicate the condition. An INVALID
LEADSET INOP is generated at the Information Center.
The labels and colors of the ECG electrodes differ according to the
Note—
standards that apply for your hospital. The electrode placement references and
illustrations in this chapter use the AAMI labels and colors. See the table below
for additional label and color information.
Electrode Labels
AAMI EASI IEC
RA I R
LA S L
LL A F
RL N N
V/Va E C/Ca
Vb Cb
V2 C2
V3 C3
V4 C4
V5 C5
V6 C6
Electrode Colors
AAMI
White
Black
Red
Green
Brown
Brown/White
Brown/Yellow
Brown/Green
Brown/Blue
Brown/Orange
Brown/Violet
Measuring ECG
IEC
Red
Yellow
Green
Black
White
White/Red
White/Yellow
White/Green
White/Brown
White/Black
White/Violet
ECG Monitoring 6-5