Philips IntelliVue TRx Instructions For Use Manual page 69

Inserting the Insert batteries into the transceiver using the following procedure.
Batteries
Step
Draft - 1 Aug 08
Action
1 Open the battery compartment by swinging the compartment door
o
90 counterclockwise into an open hinged position.
2 Insert two AA 1.5V Alkaline batteries, matching the polarity with
the +/- indications inside the compartment.
+
Both batteries are inserted with the + polarity in the same
Note—
direction.
3 Close the battery compartment door.
4 Listen for the start-up sounds. (See "Turning On" on page 4-3).
Watch for the indicators on the front of the transceiver to illuminate
briefly.
5 Connect the patient cables to the transceiver.
+
Battery Information
Basic Operation 4-15