Philips IntelliVue TRx Instructions For Use Manual page 187

Unit Settings - Telemetry Setup
Control Function
Suspend Sets the alarm suspend duration
Duration time for each assigned device on
the Information Center.
Battery Display/disable a battery gauge
Gauge on for each assigned device on the
Information Information Center.
Center
Note—
rechargeable batteries are being
used.
RF Auto Enable/disable RF operation
Shutoff during an extended situation of
all leads off for more than 10
minutes and the SpO
not connected.
Fixed Pacer Sets the appearance of the pacer
Amplitude spikes to a fixed size as they
appear in the patient window.
Autopair Enable/disable the autopairing of
the transceiver and the
IntelliVue Patient Monitor at the
Information Center.
Enable SpO Enable/disable the SpO2
2
measurement at the Information
Center or Telemon.
Draft - 1 Aug 08
Set to disable if
sensor is
2
Telemetry Functions at the Information Center & TeleMon
Telemetry Functions at the Information Center
Settings
1, 2, or 3 minutes
enable
disable
enable
disable
enable
disable
enable
disable
enable
disable
Factory
Default
2 minutes
enable
(battery
gauge is
displayed)
enable
disable
enable
enable
9-11