Philips IntelliVue TRx Instructions For Use Manual page 77

Draft - 1 Aug 08
If the transceiver is connected to TeleMon or the MP5 IntelliVue Patient
Monitor, alarms can be suspended only from TeleMon, and not from the
Information Center. The Alarms Suspend icon on the transceiver is lit (see
"Transceiver Controls - Front" on page 3-2), and an "Alarms Suspended"
message appears at TeleMon and the Information Center. Patient monitoring
(display of patient waveforms and numerics) continues for the duration of Alarm
Suspend/Pause.
Step
Action
1 Press the
Telemetry
Alarm Suspend/Pause.
While alarms are suspended:
• The transceiver illuminates the Alarms Suspend icon.
• The message "Alarms Suspended" (or "Alarms Paused") is
displayed in the Patient Sector at the Information Center.
Note—
message is "Tele Alarms Suspend".
2 For instructions on how to suspend/pause alarms from the
Information Center, see the IntelliVue Information Center
Instructions for Use and the Information Center Online Help.
For instructions on how to suspend/pause alarms from TeleMon or
the MP5, see their respective Instructions for Use.
and buttons simultaneously to activate
Check
For paired bedsides in Telemetry Overview, the
Suspending/Pausing Alarms
Alarms 5-3