Patient Configurable Settings In Telemetry Setup - Philips IntelliVue TRx Instructions For Use Manual

Telemetry Functions at the Information Center
Patient
The Telemetry Setup window enables you to configure the transceiver for
Configurable
patient-specific settings. All patient-specific settings will be reset to the unit
Settings in
defaults upon patient discharge. To access the window, from the Patient
Telemetry
Window click Telemetry Setup.
Setup
The following settings can be adjusted in this window.
Patient-Configurable Settings in Telemetry Setup
Control Function
Telemetry Determine the Information Center
Button response when Telemetry Button
is pressed.
Telemetry Set the volume level for all
Device: adjustable sounds on the
Volume transceiver.
Telemetry Enable/disable Spot Check and
Device: pulse detection tones on the
Mute transceiver.
Fixed Pacer Sets the appearance of the pacer
Amplitude spikes to a fixed size as they
appear in the patient window.
9-6 Telemetry Functions at the Information Center & TeleMon
Draft - 1 Aug 08
Setting Choices
Nurse Call - generate nurse
call alarm
Record - generate a
recording strip
Nurse Call and Record -
generate nurse call alarm and
recording strip
None
1 (low), 2, 3, 4, 5 (high)
enable (mute)
disable
enable
disable
Factory
Default
Nurse Call
3
enable
disable