Information Signals - Philips IntelliVue TRx Instructions For Use Manual

Information
If there is a connection failure within the IntelliVue Clinical Network, an
Signals
information signal will be generated. This information signal will be displayed
in the system message area on the Information Center where the affected
wireless patient monitoring device(s) (transceiver, access point, access point
controller, sync unit, or router) is assigned, as well as on all other Information
Centers connected to a common Database Server. The condition causing the
failure will be described in the Wireless Status Log, which is available in
Service Mode.
Information
Signal
Wireless
monitoring loss -
Contact Service
Note—
information signal
appears on ALL
Information Centers
connected to a
common Database
Server.
Router failure
Call Service
Note—
information signal
appears on ALL
Information Centers
connected to a
common Database
Server.
Draft - 1 Aug 08

Information Signals

Description
Problem with wireless
network infrastructure
device(s).
This
A router used in the
wireless network has
failed.
This
What to Do
Contact Service.
Note—
communication disruption
are available in the
Wireless Status Log.
Contact Service.
Maintenance, Cleaning & Troubleshooting
Troubleshooting
Details about the
11-15