Telemetry Functions At The Information Center; Telemetry Controls In The Patient Window - Philips IntelliVue TRx Instructions For Use Manual

Telemetry Functions at the Information Center

Telemetry Functions at the Information Center

Telemetry
The Patient Window at the Information Center (accessed from the Patient
Controls in
Window control in the Patient Sector) includes controls for a number of
the Patient
telemetry operations. For detailed instructions on these operations, see the
Window
IntelliVue Information Center Instructions for Use or the Online Help.
To View ECG or SpO
Move the cursor over the HR or SpO
alarm limits.
To Change ECG or SpO
Move the cursor over the High or Low numeric to display up/down arrow
controls for adjusting the limit. After adjusting the limit, move the cursor away
from the area to dismiss the limit controls.
To Change ECG Waveform Size
Move the cursor over the ECG waveform to display the ECG Waveform Size
control. Select the desired size from the list.
To Select Lead
Move the cursor over the ECG waveform to display the Lead Selection control.
Select the desired lead from the list.
Important—
To Change Va and Vb Default Lead Settings (6-lead only)
Move the cursor over the ECG waveform to display the Lead Selection popup.
Select the label from the label list. For Va or Vb, select Va or Vb, then select the
lead to be assigned. Assignment of the same V lead to both Va and Vb is not
allowed.
Important—
1. For information on ST functions performed at the Information Center, see "ST/AR ST
Segment Algorithm" on page 7-7.
9-2 Telemetry Functions at the Information Center & TeleMon
Draft - 1 Aug 08
Alarm Limits
2
Alarm Limits
2
Do not set the primary and secondary channels to the same lead.
Do not set the primary and secondary channels to the same lead.
1
label to display the current high and low
2