Philips IntelliVue TRx Instructions For Use Manual page 22

Transceiver Use with Other Equipment
Patient Remote control of monitoring parameters such as NBP, SpO
Bedside and Relearn, as well as limited overview of waves and data are supported
Monitors through Patient Bedside Monitors equipped with IntelliVue Instrument
Telemetry. Please refer to the Instructions for Use for the specific Patient
Monitor for operating information.
Patient Data can be sourced directly from the transceiver to MP5/MP5T, MP2 or
X2 Patient Monitors. The connection is made through a monitor interface cable
(MP5/MP5T only) or short range radio adapter (SRRA) inserted in the Monitor/
Service port and connected to the monitor. Non-networked MP5/MP5T
monitors can source patient data that includes SpO
temperature measurements to the Information Center. Please refer to the MP5
Instructions for Use for additional information.
M2601B
If your hospital uses TRx and/or TRx
Transmitters
you can distinguish between them by:
1-10 Introducing IntelliVue Telemetry
Draft - 1 Aug 08
• Name on the front of the device (TRx or M2601B)
• Label color (light gray for transceivers, dark gray for transmitters)
2
, NBP and predictive
2
+
Transceivers and M2601B Transmitters,
, Alarm Suspend,