Connecting The Spo 2 Cable - Philips IntelliVue TRx Instructions For Use Manual

Connecting the SpO
Extension cables: The use of extension cables presents a tripping hazard. Use
appropriate care when they are in use.
Electrical Interference: Position the sensor cable and connector away from
power cables, to avoid electrical interference.
Draft - 1 Aug 08
Cable
2
Step Action
1 Connect the sensor cable to IntelliVue TRx
• Connect reusable sensors directly into the transceiver.
• Connect disposable sensors into the adapter cable, then
connect the adapter cable to the transceiver. Remove the
protective backing.
2 Adjust SpO alarms in the Patient Window (see "Telemetry
2
Controls in the Patient Window" on page 9-2).
3 Make other adjustments in the Telemetry Setup Window (see
"Patient Configurable Settings in Telemetry Setup" on page 9-6).
Caution
Connecting the SpO Cable
2
+
.
SpO Monitoring 8-15
2