Cleaning the Transceiver
Use of abrasive cleaning materials, or disinfectants or cleaning agents not listed
herein, on any part or component of the IntelliVue TRx or TRx
damage the components. See the list of unsupported cleaners in the table below.
When cleaning the Monitor/Service port, do not use any stiff, rigid instruments,
tools, or other devices to clean debris in the port, as such actions will damage the
connector pins. A forceful water stream may be used after soaking for 5 minutes
to flush the port if necessary.
Approved
Cleaners
Draft - 1 Aug 08
Caution
Caution
Cleaner
Isopropyl Alcohol
Isopropyl Alcohol (>70%)
based
Ethyl Alchohol
Ethyl Alcohol (>70%)
based
Antibacterial Soap
Various
and Water*
Hydrogen
Hydrogen Peroxide (3%)
Peroxide
Chlorine Bleach
Sodium Hyprochlorite (1:10 concentration, mixed <
24 hours)
Active Ingredient
Maintenance, Cleaning & Troubleshooting
Cleaning and Sterilization
+
transceiver may
11-5