Ether Type
Label
VPRI Remark
No. From ...To...
Query
Delete
Incoming EtherType
Priority (Out)
Create
VLAN Priority Remark Setup – Ether Type
You can also select the priority remark type here.
Type in the range of entry number in the table you want to view (value
range is 1~256).
To query entries, type in the entry number range and then click on this
button to retrieve.
To delete entries, type in the entry number range and then click on this
button to delete.
Click on these drop-down list to select an ADSL bridge port or GIGA
bridge port.
Type in the EtherType value (hexadecimal).
Click on the drop-down list and select the outgoing VLAN priority (0 ~ 7).
Click on this button to create a new entry in the table.
- 118 -
Description