Table of Contents
Advertisement
5.4.5 aging
Description
Syntax
Parameter
5.4.6 alarm event clear
Description
Syntax
Parameter
5.4.7 alarm history clear
Description
Syntax
Parameter
5.4.8 atmdesc
Description
Syntax
Parameter
5.4.9 atm-loopback
Description ATM loopback testing OAM Cell Generation enable / OAM Cell
Syntax
Parameter
Bridge aging time
aging <number>
Name
number
Clear alarm event log
alarm event clear
None
Clear alarm history
alarm history clear
None
Go to ATM-description execution mode from Configure mode
atmdesc
None
Generation disable / Set ATM loopback type or clear loopback
status for a PVC
atm-loopback enable
atm-loopback disable
atm-looback <port>/<pvc> {type <type> | clear}
Name
<port>
Default value: -
Type: Optional
Description
Aging time (sec).
Valid values: (10~1000000) sec.
Default value: 300
Type: Mandatory
Description
Port number
Valid values: 1~24(48)
- 248 -
Advertisement
Table of Contents
