Snmp; Snmp Community - Planet IDL-2402 User Manual

4.6 SNMP

4.6.1 SNMP Community

This option allows you to configure the SNMP community that is the group that IDL-2402s
and management stations running SNMP belong to. It helps define where information is
sent. The community name is used to identify the group and serve as form of
authentication. From the SNMP menu, click on SNMP Community. The following page is
displayed.
Label
Click on this button to create a new SNMP community. After you click on New, the
following page is displayed. Type in the name of the SNMP community (up to 63
characters; note that community names beginning with a digital number are not allowed)
and select the access mode (Read only or Read/Write). Then click on Apply button.
New
Access Mode Select the SNMP community access mode: Read only or Read/Write.
Modify Click on this button to modify the community name.
Delete Select an index and then click on this button to delete a community.
SNMP Community Setup
Description
- 168 -