Priority List Mode Commands - Planet IDL-2402 User Manual

5.14 Priority List Mode Commands

The commands in this section can be executed only in the Priority List execution mode.
5.14.1 ds
Description
Syntax
Parameter
Set Differentiated Service of packets to remark VLAN priority / Show
Differentiated Service priority list entry / Disable Differentiated
Service priority list entry
ds <number> prio <prio ID> {xdsl <port>/<pvc> | gigabit <port>} dscp
<dscp>
ds <number> list
ds <number> disable
Name Description
<number> Differentiated Service priority list number.
Valid values: 1~256
Default value: -
Type: Mandatory
<prio ID> Priority value
Valid values: 0~7
Default value: -
Type: Mandatory
<port> Port number.
Valid values: 1~24(48) for xDSL, 1 for GBE
Default value: -
Type: Mandatory
<pvc> PVC number
Valid values: 1 ~ 8
Default value: -
Type: Mandatory
Diffserv Code Points, which is a 6-bit number.
<dscp>
The standardized combinations are listed below:
default
af11
Default value (bits:000000)
Assured Forwarding Class 1:Low Drop
(bits:001010)
- 334 -