5.6 Interface Mode Commands
The commands in this section can be executed only in the Interface execution mode.
5.6.1 bridge
Description
Syntax
Parameter
5.6.2 adsl-config
Description
Syntax
Parameter
5.6.3 ipoa
Description
Syntax
Parameter
Enter ATM-bridge configuration mode / Disable bridge port
bridge <bridge id> [disable]
Name
Description
bridge id
Bridge number.
Valid values: 1-8
Default value: 1
Type: Mandatory
Enter adsl configuration mode
adsl-config
None
Enter IPoA (RFC 2684) routed mode
ipoa
None
- 289 -