Spectrum Profile Configure Mode Commands; Aggregate; Bands <Index> {Start | Stop}; Bands <Index> Mask - Planet IDL-2402 User Manual

5.19 Spectrum Profile Configure Mode Commands

The commands in this section can be executed only in the Spectrum Profile execution
mode.

5.19.1 aggregate

Description
Syntax
Parameter
5.19.2 bands <index> {start | stop}
Description
Syntax
Parameter
5.19.3 bands <index> mask
Description
Syntax
Set downstream/upstream aggregate power level
aggregate {ds | us} max powerlevel <number>
Name Description
<number> Power level (tenth dBm).
Valid values: 0~25.5 step 0.1
Default value: -
Type: Mandatory
Set RF bands
bands <index> {start | stop} <value>
Name Description
index Bands array index.
Valid values: 0-7
Default value: -
Type: Mandatory
value Set start / stop frequency (kHz).
Valid values: 0-12000
Default value: -
Type: Mandatory
Set bands mask
bands <index> mask <value>
- 355 -