Table of Contents
Advertisement
5.18 Service Profile Configure Mode Commands
The commands in this section can be executed only in the Service Profile execution mode.
5.18.1 bitrate
Description
Syntax
Parameter
5.18.2 delay
Description
Syntax
Parameter
5.18.3 l2-packet
Description Set L2 Packet cell
Syntax
Parameter
Set downstream/upstream Minimum/Maximum/Planned/L2 minimum
bit rate
bitrate {ds | us} {min | max | planned | l2} <number>
Name
Description
number
Bit rate (kb/s).
Valid values: 0-65535
Default value: -
Type: Mandatory
Set downstream/upstream delay introduced by the interleaving
delay {ds | us} <number>
Name
Description
number
Delay time (ms).
Valid values: 1-63
Default value: -
Type: Mandatory
l2-packet <number>
Name
Description
number
Set L2 Packet cell.
Valid values: 0 ~ 28
Default value: -
Type: Mandatory
- 352 -
Advertisement
Table of Contents
