Table of Contents
Advertisement
5.3.117 show vlan ethertype
Description
Syntax
Parameter
5.3.118 show vlan protocol-base
Description
Syntax
Parameter
5.3.119 show vlan-translation one-to-one
Description
Syntax
Parameter
5.3.120 show vlan-translation many-to-one
Description
Syntax
Parameter
5.3.121 telnet
Description Telnet to a destination (if you're connecting to the DSLAM through
Syntax
Parameter
5.3.122 traceroute
Description
Syntax
Parameter
Show VLAN S-Tag Ether type
show vlan ethertype
None
Display protocol based VLAN table
show vlan ethertype
None
Display one-to-one VLAN translation table
show vlan-translation one-to-one
None
Display many-to-one VLAN translation table
show vlan-translation many-to-one
None
its console port, this command is not provided)
telnet <target address>
Name
target address
Trace route (and not use ICMP ECHO instead of UDP datagrams)
traceroute <target address> [no_icmp]
Name
target address
Description
IPV4 address or hostname
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Mandatory
Description
IPV4 address
Valid values: xxx.xxx.xxx.xxx
Default value: -
Type: Mandatory
- 245 -
(xxx:0~255)
Advertisement
Table of Contents
