Table of Contents
Advertisement
MACHINE FEATURES
With this machine, you can cut out or draw patterns created in ScanNCutCanvas and sent to it using
DesignNCut Manager (application for selecting cut settings). ScanNCutCanvas is an online service that allows
you to use a Web browser to download, edit and create cutting or drawing pattern data for the ScanNCut and
DesignNCut cutting machines.
1. Install DesignNCut Manager (application for selecting cut settings).
For details on the installation procedure, refer to the "Setup Guide".
2. Machine network settings
Wireless network connection.....P. 12
USB cable connection.....P. 17
3. Register the cutting machine with ScanNCutCanvas......P. 20
* You must register with ScanNCutCanvas first.
4. Send patterns to the machine and cut them out......P. 33
ScanNCutCanvas website: http://ScanNCutCanvas.Brother.com/
Devices That Can Connect to This
Machine
■ Computers
• Compatible operating systems:
Windows 7 SP1, Windows 8.1, Windows 10
* For additional operating system information, visit
our website (http://s.brother/cpqaa/).
• Compatible models:
IBM PC or compatible computer that is wireless
LAN-compatible or originally equipped with a USB
port
■ Mobile Devices
Compatible operating systems:
iPhone, iPad : iOS 9 or later
Android : 5 or later
* For additional operating system information, visit our
website (http://s.brother/cpqaa/).
About This Manual
The icons at the beginning of each step indicate the
following operation information.
: Operation performed on the machine
: Operation performed in DesignNCut
Manager (application for selecting cut
settings)
: Operation performed in ScanNCutCanvas
: Message displayed on the machine
Memo
• The machine and screens shown in this manual
may differ from the actual ones.
• This manual provides descriptions for using the
computer version of the application.
3
Advertisement
Table of Contents
